The Orion Nebula must be one of the greatest objects in the night sky. At about 1,344 light years away it’s not close but it is visible to the naked eye as a fuzzy patch in the middle of Orion’s sword.
This nebula is difficult to photograph because of the large dynamic range in the image. The Trapezium is a group of bright stars that illuminate the nebula and the difference in brightness between these stars in the centre and the fainter clouds on the outside makes it hard to image and process the nebula in all its glory.
This image was taken at Rabbiter’s Hut in the Adelaide Hills on a dark night and processed from 5 light frames and 2 dark frames of 5 minutes each. I used the Orion ED80 (500mm focal length) and Canon 600D (modified). The Skywatcher EQ6-R was tracking on its own without any guiding but I do make an effort to get the polar alignment as accurate as practically possible.
New moon and dark skies far from the city lights for two nights.
I took a lot of photos with the new EQ6-R mount, Canon 600D (modified) camera, an Orion ED80 EON and a Meade 8″ SCT. There will be a lot of processing required over the next few weeks to get all the photos out. I experienced a lot of problems but that is par for the course by now.
The first photo is the Rosette Nebula. About 5,000 light years away and visually it’s about three times larger than the Orion Nebula. Its is not bright and require a large telescope to see it under dark skies. If you want to take a photos of it, it is a great target, not too difficult and it is located high in the sky this time of year, just east of Orion.
This image was processed from 22 light frames and 6 dark frames of 2 minutes each. I used the Orion ED80 (500mm focal length) and Canon 600D (modified).
Processing was different this time. I had a lot of noise in the light frames and tried processing each individual frame in LightRoom 4 for noise reduction before I stacked all of them in DSS and processed further in LR4. What do you think?
I used the new laser alignment tool last night and it took me about 2 minutes to achieve polar alignment for the EQ6-R. I then used a 1-star alignment to get the mount setup.
To test, I used my trusty Canon 600D (modified) with a Sigma APO 120-400mm at 400mm and f/5.6 for a single 3 minute exposure. This is not a lens that I would normally use for astrophotography but I wanted a long focal length to test the alignment and tracking.
Well, let’s say that I was not disappointed with the result.The following image of the Carina Nebula is an unguided 3 minutes exposure at 400mm and there is not a trace of star trials, even when zoomed in. Take a look….
Well, I have finally surrendered to the temptation of getting myself a heavy mount.
Initially I was looking at the Skywatcher NEQ6 Pro but then discovered that the brand new Skywatcher EQ6-R mount is available on a limited product release from an Aussie supplier. Major changes are the belt driven system with zero backlash, PPEC support, newer motor drive with lower periodic error, improved tracking accuracy, 20kg payload capacity and a carrying handle!
Basic specs are as follows:
Will be delivered next week so expect more feedback here soon ……